Molds are fungi that can grow anywhere in the house and can be dangerous. Homeowners might know about the molds, but they are not easy to spot and identify, so they are often left untreated, making the problem worse. While some molds are visible and easy to identify, others grow at hidden places and often look like dirt. So, it gets complicated for homeowners to find out the problem in the first place. This comprehensive guide has a few tips from the best mold removing company that will help you identify molds and prevent them from growing.

Here are a few tips for identifying and preventing molds from growing: 

Check plumbing leakage: When you find molds near plumbing fixtures, icemakers, or any area where water connections exist, you need to check before molds get spread all over the place. To identify the leakage, let water flow like it is, don’t stop water; otherwise, you’ll not find leakage. Then check for possible holes, connections, or any broken part for leakage. If you find a leakage area, stop the water connection and contact a mold removal service to prevent them from spreading and reduce mold growth chances. 

Look at outside leakage:  if there’s mold on any exterior side, which means walls or ceilings. Then, first of all, you need to find out the leak on the wall or ceiling. To check, you need to measure the area from mold to the door, then check the same on the exterior of the wall or ceiling. Closely check and inspect nearby roof flashing, vents, window wells, wood rotting, and decks. Now check the direction of sloping towards the house. If the ground around your home gets wet often, then wetness will seep into the foundation, and dampness will become persistent. Now that you know the reason, you can hire a mold damage restoration company to help you remove molds and repair dampness.

Check if it’s mold or just dirt: Often, people misunderstand dirt with molds, while some Consider molds as dirt as they grow at hidden places, so it gets difficult to identify. One way to identify molds is by testing. You can do home testing using a swab. You can dip this swab in diluted bleach and dab it on the wall where you want to identify if it gets lightened in color or keeps coming again and again after cleaning, then assume it’s a mold. Several mold kits are available in the market, but if you’re skeptical or don’t want to touch them, consult mold remediation troy for help.

Antimicrobial Spray: After the mold restoration company completes their services or process to remove mold and all the moisture has been cleaned and dried up, spray the mold area with an antimicrobial treatment. You can find many effective antimicrobial sprays in the market. They will prevent the mold from coming back or growing. If the infected area is located in a basement, these sprays also effectively fog the room. Though the mold removal company will include the disinfectant sprays in their service, if you’re doing everything yourself, you can use these sprays in infected areas. 

Symptoms of Mold Exposure: In House and More

Mold-resistant building materials: If you are planning to build an infected area again or build a new home, make sure you use mold-resistant materials in the building. These act as protection from molds and prevent them from dwelling. These materials are unaffected by water; you can use rigid insulation and paperless drywall material during construction. You can take consultation from a mold restoration company about resistant materials. 

Use products that kill molds: Several products such as Chlorine bleach, Hydrogen Peroxide, Distilled white vinegar, baking soda, borax, etc. Chlorine bleach is one of the most commonly used products that remove discoloration and destroy molds; it needs to be diluted before use. Hydrogen Peroxide is less hard than Chlorine, can kill molds, and lighten the stains. While white vinegar is relatively gentle than others but they don’t remove stains. Baking soda will stop the mold from growing and remove them lightly. In comparison, borax is better than baking soda. These products are effective if mold is relatively smaller and you’re planning to remove it by yourself.  

Prevent molds throughout the house: Molds can be unhygienic and can destroy various parts of your home. So, it’s wise to prevent them from growing. There are various ways to prevent the mold from growing, such as reducing the moisture in your home by opening windows and using dehumidifiers, fans, repairing the plumbing leakages, preventing rainwater from seeping into your home, cleaning the fabrics and all places of your home regularly, make sure you store items at well ventilated and dry places.

Final Thoughts:  These above-stated tips are effective and useful; if you find any place or spot in your house that looks like mold, use these tips to identify and contact mold remediation troy services immediately because the sooner you solve the problem, the better.